News Center

On December 21, the special technical docking meeting on converter system energy efficiency improvement for the ultimate energy efficiency project in the steel industry was successfully held in Yuquan District, Yingkou City     In order to better implement the "Ultimate Energy Efficiency" project in the steel industry, promote the rapid promotion and application of advanced and mature technologies and the collaborative research and development of common problem technologies, the China Iron and Steel Industry Association organized and held eight special technology docking meetings in accordance with the annual plan to provide "dual carbon best practices" "Energy Efficiency Benchmark Demonstration Factory" cultivates enterprises and technical units to build a communication platform to promote enterprise energy saving and improvement. This meeting is the eighth special meeting after seven matchmaking meetings on blast furnaces, electric furnaces, coke ovens, by-product gas, low-temperature waste heat, digital empowerment, and compressed air.   Huang said in his speech that China's steel industry "ultimate energy efficiency project" since its official launch on December 9 last year, has been the steel enterprises and upstream and downstream strong support from ecosystem companies. The project mainly completed the following tasks: First, the development of key workbench can save the benchmark data filling system, consolidate the data management foundation. The system is based on the enterprise energy balance sheet, combined with the cultivation of enterprise energy consumption, statistics, analysis and group standard regulations. The energy consumption calculation tables and energy consumption adjusting tables for coking, blast furnace, converter and electric arc furnace are established, which standardize the statistical boundaries and calculation methods of each energy medium to the greatest extent, and can not only realize the energy consumption standard among the main equipment of the enterprise, but also can analyze the influence accurately.   The important factors of the difference in index values provide a solid data basis for enterprise energy efficiency benchmarking and technical benchmarking. The second is to organize industry forces to improve the "three lists" work and actively play the guiding role of the association. The "three lists" refer to a technology list, a policy list and a capability list. The technology list contains 50 mature technologies, which is a summary of the experience of energy efficiency technological transformation of many enterprises over the years; The policy list contains a total of 26 documents, summarizing the policy incentives and support for energy efficiency improvement by national ministries and local governments. The capacity list (expected to be officially released in January next year) involves 139 technologies from 84 units, including outstanding suppliers of multi-process technologies...

On the evening of December 18, Beijing time, Nippon Steel and U.S. Steel jointly announced that Nippon Steel would make a pure cash acquisition of U.S. Steel at a price of US$55 per share. The offer represents a nearly 40% premium to last Friday’s closing price of $39.33. The transaction has been unanimously approved by the boards of directors of Nippon Steel and U.S. Steel.     According to U.S. Steel, the US$55 offer corresponds to an equity value of US$14.1 billion. Taking into account the debt assumed, the enterprise value corresponding to this acquisition will reach US$14.9 billion, equivalent to more than 2.1 trillion yen. In fact, U.S. Steel's stock price has been fluctuating in recent months following acquisition rumors. Since Cleveland-Cliffs, the largest flat steel producer in the United States, made an acquisition offer of nearly US$7.3 billion on the 8th of this year, the company's stock price has doubled.       Nippon Steel's Acquisition of U.S. Steel Faces Strong Opposition from Many Parties According to the merger and acquisition plan given by Nippon Steel, U.S. Steel is expected to hold a shareholders' meeting in March next year. Based on the approval of the company's shareholders and regulators, the transaction is expected to be completed in the second quarter or second quarter of next year. Michael Leiter, head of CFIUS and national security practice at Skadden, Arps, believes CFIUS is "unlikely" to block a deal with a country as close to a U.S. government as Japan, despite growing political opposition to the deal among politicians and unions. Allies reach a deal.     Asked about the proposed deal during a White House press briefing on Tuesday, White House press secretary Jean-Pierre declined to comment specifically on the acquisition.   CNN said that despite political opposition, the fate of U.S. Steel Corp. being sold to Japanese capital is basically a certainty. This has sounded the alarm to the current global corporate giants. The world is changing so fast that it is jaw-dropping.  

After few weeks waiting, our Mauritanian client received the tubular tower and expressed gratitude towards our high efficiency and quality. We calculated the maximum load of a container and did our best to utilize the room.         According to clirnt's request, we didn't color the tower after hot-dip galvanization. And our client painted it in red and white based on actual usage and their preference, which is a very suitable color in the local.        Despite some asembling problems showed up in the application, the 3-legged tubular tower was still perfectly put into service under the instructs of our professional technicians and engineering team. And after a few days' trial operation, the tower is officially put in to use, helping local people build more effective connections.   

From December 6th to 8th, the 2023 Advanced Training Course for Professional and Technical Personnel of Steel Structure Enterprises was held in Changshu, Jiangsu Province. The meeting was hosted by the China Steel Structure Association and hosted by Jiangsu Longteng Special Steel Group Co., Ltd., with representatives from nearly 70 steel structure enterprises across the country. More than 140 business managers and technical leaders attended the meeting. Leaders and guests attending this meeting include Liu Yi, executive vice president of China Steel Structure Association, Li Qingwei, secretary-general of the association, Zhou Guangen, executive deputy general manager and chief engineer of Zhejiang Southeast Grid Co., Ltd., and chief engineer of Shanghai Construction Engineering Group Co., Ltd. Chen Xiaoming, Deputy Secretary of the Party Committee and President of Jiangsu Longteng Special Steel Group Co., Ltd. Xu Sheng, General Manager of Changshu Longteng Welding Materials Technology Co., Ltd. Zhang Po, General Manager of Changshu Longteng New Energy Equipment Technology Co., Ltd. Huo Xiaofei, etc. Chief Engineer Zhou Guangen titled "Steel Structure Processing and Manufacturing Technology" and focused on the current situation and development trends of steel structure processing and manufacturing, technical requirements and precautions for each link in the steel structure processing process, quality control measures during the processing process, common quality problems and preventive measures, steel structure Structural digital processing technology and other aspects, the knowledge related to steel structure processing and production was explained in detail. Chief Engineer Chen Xiaoming took "Steel Structure Installation Technology" as the title, covering conventional installation technologies such as large-span space structures and super high-rise buildings, overall installation, translation, and lifting technologies of steel structures, suspension structure installation technologies, and spoke-type tension structures. Installation technology, structural construction analysis and other aspects were explained to the students present in detail the relevant knowledge of steel structure installation. After the training course, the teaching experts, leaders of the association and Longteng Group issued completion certificates to the participants of the training course.  

The customer from UAE ordered a batch of bionic camouflaged palm tree towers and visited the factory as well as the  production workshop during the production cycle.Our peoduction line is one of the most advanced ones, which customers gave compliments.     During the inspection, the customer spoke highly of our advantages and put forward some specific needs for specific production and packaging. We will meet customer requirements in subsequent work.     We entertained our clients the night before they left. Together with his clients, he tasted delicacies from well-known restaurants. and communicated again about matters related to subsequent cooperation.   Middle and below is a photo of our chairman Derek Dong and general manager Wilson Wang with our customers. 

On October 29, the 2023 Mining Whole Industry Chain Technology Conference and the 20th Anniversary Celebration of Tianzhou Group were held in Xi'an. The theme of the conference was "Being Gratitude, Steady and Long-term", aiming to promote practical cooperation, mutual benefit, and common development in the mining industry through technological innovation. develop. Li Tianen, chairman of Xi'an Tianzhou Mining Technology Group Co., Ltd., attended the meeting and delivered a speech. More than 500 representatives from all over the country, including geological exploration, mining, mineral processing, smelting, legal, financial and other mining enterprises and institutions, as well as relevant universities, scientific research institutes, industry associations, etc. attended the meeting on site or through online live broadcast.

Client from Kuwait visited our factory, confirming the status of prodction and quality. They visited our production workshop and shipping area and expressed their appreciation for our process system and management model. Subsequently, the two parties discussed some technical issues for follow-up cooperation. We sincerely look forward to reaching a cooperation in the near future.

Under the long-term cooperation, we were honored to welcome Fijian customers to visit our factory and galvanizing plant, and take customers to visit the world-famous Jiaozhou Bay Cross-Sea Bridge. During this visit, the customer praised our production line, quality control and professional service.          

We are really hornored that one of our regular clients finally come to inspect our factory at the end of the year. It took three days to inspect all the on-going projects.  Mr. Wilson, the general manager of the company, warmly received the guests from afar on behalf of the company. Accompanied by the principals and staff of each department, we visited the production workshop, assembly workshop, and production workshop of the company's factory. During the visit, our company's accompanying personnel gave the customer a detailed introduction to the tower production line and answered the questions raised by the customer. Questions were answered professionally. His rich professional knowledge and competent working ability have also left a deep impression on customers. In order to allow customers to have a more comprehensive understanding of our factory's production capacity, business philosophy, and product quality, accompanied by Wilson, our company's general manager, the customer visited and inspected the entire production process and processing workshop. After having a better understanding of the company's scale, strength, design capabilities and product structure, the customer recognized our company's better production workshop environment, orderly production process, strict quality control system and advanced processing and inspection equipment. with approval. During the visit, the company's relevant technical personnel gave detailed answers to various questions raised by customers. Their rich professional knowledge and enthusiastic work attitude also left a deep impression on the customers.  

On Dec. 28th, Mauritian client came to our factory to inspect 3-legged tubular tower's trial assembling and he was very satisfied with our quality and professionalism.     

  Pakistani clients come to the factory for inspection of transmission tower project before shipment. 

After Chinese New Year, Dan, our US client, come to China to inspect the production line of Camouflaged Tree Tower and its accessories.  Dan spoke highly of our tower production line.    Dan also inspect camouflaged artificial foliage on the camouflaged tower. Our design can guarantee 15 years of warranty and technical support.